Brother HL-2130 Toner Reset Leave a comment

1. Open the front cover and leave open while completing the following steps.
2. Turn the printer off.
3. Hold the ‘go’ button while turning the printer on. All panel lights should be on.
4. Release the ‘go’ button.
5. Press the ‘go’ button 2 times.
6. Pause.
7. Press the ‘go’ button 5 times.
8. The toner light should be off.
9. The paper light should be on or flashing.
10. Close cover. The ready light should be the only light on.
11. Turn the Printer off and on again